Home
About Us
Product
News
Marketing Network
Quality
Contact Us

Products

PRODUCTS

AW Series

Classification:

Angular stroke actuator

Product Introduction

The AW series pneumatic actuators are divided into double acting and single acting (spring return), with two separate cylinders, making it easy to manufacture large-sized cylinder blocks, with large output torque and flexible and stable movements; The inner wall of the cylinder block and piston shaft are plated with hard chromium, which has good wear resistance; All sliding components are equipped with oil-free lubrication shafts and guide rings to reduce friction coefficient and extend service life. The U-shaped curve characteristic output torque of AW pneumatic actuators is more suitable for large-diameter ball valves and butterfly valves.

online message

Product Introduction

● AW series double acting single cylinder

Working medium: filtered, dried or misted clean air

Working pressure:Double-acting：0.3~0.8MPa

Operating temperature：

Normal temperature type：(Use the NBR O-ring) -20°C~ +80°C

Low-temperature type：(Use the silicone rubber O-ring) -40°C~ +80°C

High-temperature type：(Use the fluororubber O-ring) -20°C~ + 180°C

Rotation angle：Standard type：0°~90°± 5°

Output torque：Double-acting：0~175165N.m

Air source interface：G1/4", G3/8", G3/4", G1"

No.	Name	Q’ty	No.	Name	Q’ty	No.	Name	Q’ty	No.	Name	Q’ty
1	Box	1	11	Pin shaft	1	21	Snap ring	1	31	Locknut	2
2	Shift lever	1	12	Bushing	2	22	Antiwear washer	1	32	Plain washer	2
3	Spindle	1	13	Snap ring	2	23	O-ring	1	33	O-ring	2
4	Partition panel	2	14	Snap ring	2	24	O-ring	1	34	Adjusting screw	2
5	Piston	2	15	O-ring	2	25	Antiwear washer	1	35	Nut	8
6	Cylinder block	2/3	16	Guide ring	2	26	Snap ring	1	36	Spring washer	8
7	Cylinder head	2	17	O-ring	2	27	Flat key	1	37	Plain washer	8
8	Piston rod	1	18	O-ring	2	28	O-ring	2	38	Stud	8
9	Spring	1/2/4	19	O-ring	2	29	Retainer pin	2	39
10	Spring cylinder	1	20	O-ring	2	30	Set screw	1	40

Key words:

Extraordinary valve