产品中心
AT Series
AT Series
AT Series
AT Series
AT Series
+
  • AT Series
  • AT Series
  • AT Series
  • AT Series
  • AT Series

AT Series


Product Introduction

The AT series pneumatic actuators are thoroughly developed and designed based on state-of-the-art technology, new materials, new technology, and innovative ideas at home and abroad. Due to rack-and-pinion transmission mechanisms, the output thrust is higher, performance is more reliable, and multiple specification types are available for selection, making them more affordable. The products fully comply with the latest international standards and technical specifications and have the advantages of safety, anti-explosion, etc.; the design is exquisite; and the valve assembly is developed to fulfill the current and future demand for automation control valves.

Product Introduction

● AT Series Actuators

Working medium: filtered, dried or misted clean air

Working pressure:Double-acting: 0.2~0.8MPa 单作用: 0.4~0.8MPa

Operating temperature: 

Normal temperature type:(Use the NBR O-ring)-20°C~ +80°C 

Low-temperature type:(Use the silicone rubber O-ring)-40°C~ +80°C 

High-temperature type:(Use the fluororubber O-ring) -20°C~ + 180°C

Rotation angle: Standard type: 0°~90°± 5°

Output torque:Single-acting: 0~13022N.m 单作用: 0~6728N.m

Air source interface: G1/4", G1/2"

AT Series Actuator Structure Diagram

 

No. Name Q’ty Material Preservative treatment Optional materials
1 Octagonal shaft sleeve 1 Alloy steel Nickel plating  
2 Adjusting bolt 2 Stainless steel    
3 Adjusting nut 2 Stainless steel    
4 Upper shaft strap 1 Engineering plastics    
5 Lower shaft strap 1 Engineering plastics    
6 Adjusting O-ring 2 NBR   Silicone rubber / fluororubber
7 End cap bolt 8 Stainless steel    
8 End cap O-ring 2 NBR   Silicone rubber / fluororubber
9 Piston strap 2 Engineering plastics    
10 Piston O-ring 2 NBR   Silicone rubber / fluororubber
11 Spring 0~12 Spring steel Dipping paint  
12 Circlip 1 Stainless steel    
13 Indicator 1 Engineering plastics    
14 Lower shaft O-ring 1 NBR   Silicone rubber / fluororubber
15 Upper shaft O-ring 1 NBR   Silicone rubber / fluororubber
16 End cap 2 Die-casting aluminum    
17   Piston 2 Die-casting aluminum    
18   Guide shoe 2 Engineering plastics    
19   Cylinder block 1 Aluminium extrusion Hard anodizing  
20   Gear shaft 1 Alloy steel Nickel plating  

 

The information in the above table is for reference only. The final confirmation shall be based on the mutually agreed-upon drawings.  


Key words:

Extraordinary valve

online message